Additional information : More details you will find in the attachement.

Additional information : Spindle r.p.m. range: 45 - 4 500 r.p.m. Spindle hole: 61 mm Working travel: X: 145 mm Z: 340 mm Rapid traverse: X: 20 000 mm/min Z: 20 000 mm/min tailstock

Additional information : more details on request

Additional information : Machinein good condition

Additional information : CNC-Lathe: Other information very quick bar automatic lathe, machining with 3 tools at the same time high dynamic drives, counter spindle x axis as linear motor, turret changing time cut-to-cut 0,55 sec. parts discharge with grip to discharge belt, with loading magazin length about 4500 mm, bar length 3200 mm turning diameter 36 mm turning length 100 mm control TRAUB TX8i Main spindle Bar passage max. 36 mm turning speeds 6300 U/min capacity at 100% load 6,7 kW capacitiy at 25 % load 10,7 kW torque 21 / 32 Nm C-Axis 0,001 ° counter spindle Bar passage max. 36 mm slide travel Z4 / X3 250 / 370 mm turning speeds 6300 U/min capacity at 100% load 6,7 kW capacitiy at 25 % load 10,7 kW torque 21 / 32 Nm C-Axis 0,001 ° rapid travel X3 / Z2 30 / 30 m/min Turret 1 with driving attachment 12 Stat./stat. work travel X, Y, Z 50 / +/-20 / 100 mm rapid speed X, Y, Z 15 / 15 / 30 mm Cut to cut time 0,55 sec. ja / yes capacity at 100% load 2 kW capacitiy at 25 % load 5,5 kW torque 7,2 / 14,4 Nm front attachment ja / yes tool taper 5 St./pcs. Driven Tools 4 St./pcs. X-3-travel 370 mm Z-3-travel 250 mm rapind travel X3 / Z3 30 / 30 m/min Backworking station ja / yes tool taper 5 St./pcs. Driven Tools 4 St./pcs. slide travel X4 / Y4 73 / +/- 50 mm rapid travel X4 / Y4 15 / 15 m/min Paper band filter ja / yes high-pressure pump ja / yes chip conveyor ja / yes load magazine FMB Turbo 5-42 Bj./new 2000 total power requirement 33 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 3,335 x 1.222 x 1,680 m

Additional information : CNC-Lathe: Other information: CNC turning lathe with bar feeder Hydrobar and tool holder equipment. working hours: about 30.000 turning diameter 340 mm turning length 205 mm control TRAUB TX 8F TRAUB Spindle diameter main spindle 42 mm Bar feeder Hydrobar Tool turrret 12 Stationen / stations feeds X, Z 10000 mm/min rapid traverse X-axis 12 m/min rapid traverse Z-axis 15 m/min tail stock ja / yes total power requirement 20 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 7 x 2 x 2 m L x B x H

Additional information : CNC-Lathe: Other information: automatic lathe with 10 axes and independently counter spindle with driven tools movable headstock S1 (Z1) - movable headstock n=8000 rpm - collet pick-up: SCHAUBLIN F 37 - adjusted spindle stop S1 (0,1 degree) tool carrier (X1-Y1 / X2-Y2) - 2 independent cross slides with 2 x 5 tool pick-up (cross section: 16 x 16 mm) - 10 preselectable tool holder (5 up / 5 low) - drive unit S2 (n=8000 rpm) for maximum of 4 turning tools on the backmost tool carrier - therefrom 2 units with turning boring / milling spindle for collets ESX 25 front attachment (X3 - Z3) - cross slide with 4 tool carrier D= 25 mm Independent counter spindle S4 (X4 - Z4 - Y4) - slide with 3 independent axis including driving attachment (n=8000 rpm) - collet pick-up SCHAUBLIN F 37 Back side attachment for 7 tools - 4 tool carrier D=25 mm - 3 tools crosswise Numerical control PNC-DECO - basis control is FANUC - 10 PNC axes - AC-motors and absolute measuring system - 31 tool compensation on each axis - C-axes connection - thread rotator attachment - complete set of collets (main and counter spindle) - cemplete set of guide bushing - syncron rotating guide bush, max. passage: 32 mm - parts ejector with pneumatic cylinder for the counter spindle collet

Additional information : CNC-Lathe: The INDEX G300 gives standards for economical and precise productions. For machining also highly complex parts in small and medium lot sizes, for bar parts and chuck parts. (recommanded chuck size D=250mm) This well-maintained turning and milling center INDEX G 300 has: main- and counter spindle identical in contruction ( robust hollow shaft motors) for complete machining at maximum operation accuracy reduction of part production time due to simultaneous machining at the main and counter spindle with three turrets, - cabling and hydraulic cable in turret 2 - new - ball screw turret 3 in X3 - new - ball screw and glas measure in Z4 - new - additional air conditioning unit in electrical cabinet - all axis cards are reconditioned - portal acceptance for parts with pneumatic claw - bar loader for short bars IRCO with spindle extension accessories: clamping chuck Hainbuch BZI90 and BZI 65 turning diameter 250 mm turning length 710 mm control C 200-4 / Sinumerik 840C max. swing diameter 590 mm spindle passage mainspindle 90 mm Spindel diameter counter spindle 90 mm Speed of main spindle 3.500 U/min Chuck diameter counterspindle 200 mm Speed of the counter spindle 3.500 U/min clamping device Hainbuch BZI 90 C-axis for main and counter spindle ja / yes Adjust and indexing mechanism Haupt-/Gegenspindel main/counter sp Haupt-und Gegenspindel main/counter sp Turret 1 with x-and z-axes ja / yes X / Z-way 140 / 710 mm Turret 1 + 2 with driving attachment 6.000 U/min Turret 2 with x-and z-axes 12 tat./stat. X / Z-way 140 / 705 mm tool taper VDI 30 Turret 3 with x-and z-axes ja / yes X / Z-way 140 / 645 mm Chip hinge frame conveyor ja / yes coolant pump 8 bar Total connected value 72 kW current capacity 90 kVA weight 6,55 t

Additional information : CNC-Lathe: Accessories: number of controlled axis 4 number of tapers in turret head 12 / 12 face slide travel 190/215 mm spindle bore 104,5 mm spindle turning speed range 20 - 4000 U/min feeds - cross 5000 mm/min feeds - longitudinal 5000 mm/min power capacity 50/22,5 kW weight of the machine ca. 10,2 t

Additional information : CNC-Lathe: turning diameter 200 mm turning length 400 mm control C 200-4 / Sinumerik 840 C Turret 1 14 Stat. VDI 25 swing diameter 420 mm Main spindle 60 Durchm/diam counter spindle 60 Durchm/Diam chuck: Röhm KFD-HS-200/3 rated capacity 28 kW

Additional information : CNC-Lathe: turning diameter 200 mm turning length 400 mm control C 200-4 INDEX Spindle passage collet clamping 42 mm spindle diameter in front bearing 85 mm Spindle speeds max. 6300 3-jaw chuck 160 mm C-Axis 0,001 ° Turret 1 with x, y, z-axes workspiece system DIN 69880 VDI 25 Driven Tools 14 Stk. / pcs. X1/Y1/Z1-way 155 / 120 / 400 rapid speed X, Y, Z 20 / 7,5 / 30 m/min hydraulic tailstock ja / yes centre distance 400 mm chip conveyor ja / yes coolant pump ja / yes weight of the machine ca. 4 t dimensions of the machine ca. 3,6 x 3,1 x 2,1 m

Additional information : CNC Lathe: 4-axis-CNC-production lathe with two turrets and machining on the part-off side. the spacious working area of the GDS lathe is easily accessible and allows a quick change of the working pieces as well as a speedy re-tooling.

Additional information : CNC Lathe: Short turning lathe diameter 42 mm can only be sold togehter as package with project no. 140044 (Manurhin KMX 20- swiss automatic lathe), because the machines have only one single control together. accessories for both machines together: 1 adjustment (pre-setting) equipment 6 driven tool holders 25 fix tool holders working hours: 16.000

Additional information : -

Additional information : -

Additional information : More details on request

Additional information : more details on request

Additional information : more details on request

Additional information : more details on request

Additional information : more details on request